Industry news

How to remove dust from fiber laser cutting machine?

Laser is one of the most commonly used metal cutting methods. It is efficient, easy to use, and common in factories. However, using fiber laser cutting machine to process metal sheets will definitely generate dust. When these tiny soot particles are generated, they will float in the air in large quantities, seriously reducing the air quality and destroying the working environment. High concentrations of soot are also extremely harmful to workers working in it, often leading to serious diseases such as respiratory diseases. How to deal with the smoke generated by laser cutting machine, what is the best and effective way?

Currently, the commonly used laser dust removal methods are mainly divided into two types: dry and wet. The dry method is to add a set of laser cutting dust collectors and dust removal equipment, and the wet method is to place the cutting process on the water surface to form a water bed cutting platform, using water flow power to absorb dust and purify. After a comprehensive comparison of the two methods, the dry process, especially the smoke blowing and cleaning system, is the most popular in factories because it is the most convenient to install and use. The smoke generated by laser cutting is concentrated in the lower part of the workpiece. Therefore, the present invention has a suction port at the lower part of the workbench, which is divided into uniform small suction port areas.

On one side of the dust removal system platform, there is also a sliding air suction pipe, which has an inlet and can move with the cutting head. When dust is generated, the wind force of the air duct blows the dust to the inlet, thereby achieving the effect of collecting small air volume and high collection rate.

The collected dust will be evenly transported to the dust removal host for filtration. The main structure is the same as the dust collection and dust removal system. Installing the filter will intercept dust above 0.3m and complete the dust cleaning process. The laser dust removal efficiency is above 90%, and the effect is remarkable. Due to its simple installation and low cost, it has become the most commonly used dust removal method for laser cutting.


Contact: Stephen Zhang

Phone: +86-13296443055

Tel: +86-0531-88273128


Add: No.6 HeHua road Licheng District Jinan City, China

Scan the qr codeClose
the qr code